**SORRY OUT OF STOCK**
Please note: To check the shipping for your country and to see if any taxes apply, first add the product to the Basket.
Next go to View Cart and click on Estimate Shipping and Taxes. Enter your Country and apply the shipping. The total will be updated with the shipping and remove taxes where applicable.
The new Quad Winder is capable of winding four guitar pickups at the same time and ideal for Guitar workshops that need to speed up their production of bobbins.
Just like our popular Guitar Pickup Mini Coil Winder it has multiple spacing of M4 threaded holes on the Bobbin Plate, to accommodate most Guitar Bobbins out there and also pockets for magnets.
We no longer supply the magnets, but for anyone wanting to fit their own, the pockets are 10mm diameter and 2mm deep.
The magnets are handy if re-winding a pickup that already has the slugs inserted.
Where the Mini Coil Winder has 1 bobbin plate, the new Quad Coil Winder has four which are all synchronised.
Do not get mislead by the pictures making the machine look small.
The size of the machine is 870mm wide and 400mm deep, weighing over 40kg !!!!
It is solid and robust in every aspect of design.
Introductory Special Offers for the accessories when buying a machine.
4 X 0.3mm Ruby Tipped Nozzles, usually £100.00 but reduced to £60.00
4 x MTCS Tensioners, usually £1100.00 but reduced to £800.00
Machine Build Features
*High grade C5 ballscrew is used along with precision C5 bearings combined with anti-backlash couplers on each axis.
*Low profile Hiwin style rails for smooth running with no unwanted side movement.
*All of the aluminium plates come with a really attractive finish, as well as bead blast and oxidisation treatment.
Using solid, thick 10mm plates creates a stable frame that increased accuracy, none of your cheap thing plates to make the machine look fancy used in this design!
*All machines are now fitted with Closed Loop motors on both feeder and bobbin assembly. This increases the torque, accuracy, speed and no loosing steps. Speeds of above 1200 RPM are possible but as usual we always play safe and recommend 1000 RPM as the max speed !
*CE certified and RHOS compliant. Declaration included in setup manual.
*Built in safety features such as Emergency Stop, Limit switches and Safety hood.
*Four Pickups Bobbin Plates.
*Four Rotating Tailstocks that can be locked on precision low profile sliding rail.
*Four Easy flow wire guide using ceramic pulleys, felt pad adjuster and nozzle holder.
*Low cost, accurate machine which allows full control of each Axis down to degree level, to suit your winding pattern using our Scripting Engine within the software.
*Free windows software to control the machine via USB.
Automated options for traditional winding and also two different Scripting Engines that allow Incremental recipes to be created or Absolute recipes.
*Comes with the new ARM Controller MKII board and the latest firmware.
This is controller is a custom designed to work with our Coil Winding machines and is not available from any where else.
CAD Animation Video
Please see video below that will give an idea of how the machine can be adjusted and ran.
The machine comes with a very simple felt wire tension system to keep the price down.
You would need to build some sort of support bar to guide your wires back to your spools of wire if not using the tensioners.
For small wires the spool of wire can be sat on it’s side and the wire will then be threaded over the top bar and into the back of each Wire guide. It will then go across a porcelain guide wheel, through a set of felt tensioners and through the ruby nozzle.
But we highly recommend using the correct tensioners if within your budget.
The Quad Coil Winder is controlled via the USB port of a PC running Windows, along with our custom software that is supplied FREE.
The resolution pitch of the Quad Coil Winder belt system is 0.0005mm resolution steps with a minimum pitch of 0.1mm
The software will calculate the nearest layer count based on the pitch you choose so you can see how close you are to the original.
Playing with the software will probably make more sense than me trying to explain!
Also the software comes with a populate button that will load the built in database with a default set of common guitar pickup bobbins.
|Dimensions of base plate (L x W)||870mm x 400mm|
|Max feeder travel||Max feeder travel approx. 100mm(35mm Between Bobbin plate & Tailstock|
|Maximum Stepper motor RPM||1200 RPM (1000 RPM recommended MAX)|
|Maximum bobbin diameter (Height)||85mm|
|Wire range||0.01mm - 0.5mm (bigger wire sizes supported for single layer)|
|Feeder max resolution||0.0005mm|
|Power Supply||24V 16amp power supply|
|Software/Firmware||Free Firmware upgrades and Free Windows Software.|
|Warranty||12 Month return to base warranty.|
CNC Guitar Pickup Quad Coil Winder
- Brand: CNC Design Ltd
- Product Code: CNC Guitar Pickup Quad Coil Winder
- Availability: Out Of Stock
Select an option below