Now trading for over 10 Years and have sold well over 1000 Coil Winding Machines !!!!!
If in stock then we book a courier collection on the same day as we receive the order.
Our daily collection cut off time by DHL Express is 1:00pm so if the order was received before this time, then it will go out the same day, if not then it will be the next day.
Please note: To check the shipping for your country and to see if any taxes apply, first add the product to the Basket.
Next go to View Cart and click on Estimate Shipping and Taxes. Enter your Country and apply the shipping. The total will be updated with the shipping and remove taxes where applicable.
The CNC 200mm Coil Winder MK6 is ideal for anyone who needs to produce small quantity runs of coils or custom one-off coils.
A vast range of different coils can be wound for electronic projects.
All of the aluminium plates come with a really attractive finish, as well as bead blast and oxidisation treatment.
Using solid, thick 10mm plates creates a stable frame that increased accuracy, none of your cheap thing plates to make the machine look fancy used in this design!
All machines are now fitted with Closed Loop motors on both feeder and bobbin assembly. This increases the torque, accuracy, speed and no loosing steps. Speeds of above 2000 RPM are possible but as usual we always play safe and recommend 1500 RPM as the max speed !
CE certified and RHOS compliant. Declaration included in setup manual.
Built in safety features such as Emergency Stop, Limit switches and Safety hood.
Button Control Box now fitted to the machine as standard and interacts with the software.
Please note that the buttons we now use are small than the ones shown on the pictures. We will update them soon.
Precision ER25 chucks with low runout compared to drill chucks.
Rotating Tailstock that can be locked on precision low profile sliding rail.
Easy flow wire guide using ceramic pulleys, felt pad adjuster and nozzle holder.
Low cost, accurate machine which allows full control of each Axis down to degree level, to suit your winding pattern using our Scripting Engine within the software.
Free windows software to control the machine via USB.
Automated options for traditional winding and also two different Scripting Engines that allow Incremental recipes to be created or Absolute recipes.
Comes with the new ARM Controller MKII board and the latest firmware.
This is controller is a custom designed to work with our Coil Winding machines and is not availablle from any where else.
For more information, please check the link below
You are welcome to download the latest software take a look from the link below. Included is the software manual.
Download Latest Coil Winding Software
Dual Bobbin Motors.
With most bobbins, you simply mount one end of the bobbin in the chuck that is rotated by the main Bobbin Motor and the other end in the revolving tail stock.
But If you have a delicate core to wind that may twist when being wound then the Dual Bobbin Motor is an option that will stop that and make it a lot more easy to do.
Both motors are synchronised via the controller and we will wire it in on new orders, along with a drag chain to keep it all nice and tidy.
We now offer a choice of different sized collets when ordering your machine. The first set is included in the price, but also we can now supply extra sets of different sizes ranging from 1mm-16mm.
These collets have 0.008mm accuracy unlike cheaper ER25 collets on the market.
Please note picture shown is the dual motor attached to a MK4 machine and we will update the pictures showing it on the MK6 soon.
One nozzle is included in the price, which you can choose from the drop down box to the right.
Magnetic wire tensioner kits
And now we are also offering Magnetic Wire Tensioner Kits, again which can be added on the right hand side if in stock.
We will be offering 5 different models.
MTCSS covering wire sizes 0.03mm—0.07mm 4g—40g
MTCS covering wire sizes 0.04mm—0.14mm 10g—120g
MTCM covering wire sizes 0.08mm—0.25mm 50g—400g
MTCL covering wire sizes 0.12mm—0.35mm 80g—600g
MTCLL covering wire sizes 0.14mm-0.40mm 100g-800g
Spool Cone Kit
Also if you are mounting spools on the top bar, then a Spool Cone Kit is available to stop back run once the winding has completed.
These neat cones have needle bearings press fitted into them and fit perfectly on the 10mm top bar that comes supplied with the machine.
Spare Felt Pads and Support Arm
We are now offering a Spare Felt Pad kit that also includes a support arm for customers winding thin or flexible cores.
4 x 25mm pads with metal backing
4 x 20mm pads with metal backing
1 x Support Arm for the 200mm nozzle holder.
Set of Rubber Holding Cones
Set of Rubber cones for holding bobbin former cores or spools that need rewinding.
Cone diameter is 10mm at the tip and 25mm at widest point.
11mm-10mm Collets are needed for holding in the chucks.
Guitar Pickup Bobbin Plate
We now have a Guitar Pickup bobbin plate for people to use with the 200mm Coil Winding machine.
This bobbin plate is exactly the same as the one supplied with the CNC Guitar Pickup Mini Coil Winder and has the same multiple M4 tapped holes to mount various guitar pickup bobbins.
The main difference is that the middle hole is 8mm diameter and we can supply it with a 8mm shaft and collet.
Other Document Downloads
200mm Coil Winder Downloads
Full product information can be found on the offical product page.
Please feel free to check out the FAQ by clicking on the link above.
|Dimensions of base plate (L x W)||700mm x 300mm|
|Max feeder travel||approx. 200mm|
|Maximum Stepper motor RPM||2000 RPM (1500 RPM recommended MAX)|
|Maximum bobbin diameter (Height)||110mm|
|Wire range||0.01mm - 0.5mm (bigger wire sizes supported for single layer)|
|Feeder max resolution||0.0003125mm|
|Power Supply||24V 16amp power supply|
|Software/Firmware||Free Firmware upgrades and Free Windows Software.|
|Warranty||12 Month return to base warranty.|
CNC 200mm Coil Winding Machine (3-Axis)
- Brand: CNC Design Ltd
- Product Code: 200mm CW MK6
- Availability: 38
Select an option below