Price Increases 2022
Even though we try to offer very low cost and very accurate machines, we are struggling to keep the price as low as we have done in the past.
Due to the price increases from all of our suppliers and not to mention shipping, we have had to put up our prices on any new batches of the usual stocked machines we make.
Prices will remain the same for the current batches until they are out of stock and will not increase until we make another batch of them.
Please note: To check the shipping for your country and to see if any taxes apply, first add the product to the Basket.
Next go to View Cart and click on Estimate Shipping and Taxes. Enter your Country and apply the shipping. The total will be updated with the shipping and remove taxes where applicable.
For full information on the Mini Coil Winder MK4 Please check out the product page by clicking the picture below.
We also have a FAQ page for the Mini Coil Winder can be viewed by clicking on the image below
The Mini Coil Winder comes with felt pads that are used for applying tension to the wire, but if you want constant tension then using a tensioner such as the MTCS is an option.
Please see render image below, that shows the wire path for the tensioner when using it with the Mini.
As you can see the felt pad can be swapped out for a pulley kit that we also can supply.
This comes with Porcelain pulley and custom made spacer.
|Dimensions of base plate (L x W)||210mm x 210mm|
|Max feeder travel||40mm|
|Maximum Stepper motor RPM||1500 RPM (800 RPM recommended MAX)|
|Maximum bobbin diameter (Height)||100mm|
|Feeder max resolution||0.0125mm|
|Power Supply||24V power supply|
|Software/Firmware||Free Firmware upgrades and Free Windows Software.|
|Warranty||12 Month return to base warranty.|
CNC Guitar Pickup Mini Coil Winder
- Brand: CNC Design Ltd
- Product Code: Mini Coil Winder MK4
- Availability: 8
Select an option below