Spool Cone Kit

Price Increases 2022

Even though we try to offer very low cost and very accurate machines, we are struggling to keep the price as low as we have done in the past. 

Due to the price increases from all of our suppliers and not to mention shipping, we have had to put up our prices on any new batches of the usual stocked machines we make.

Prices will remain the same for the current batches until they are out of stock and will not increase until we make another batch of them.

 

Spool Cone Kit


If you are mounting spools on the top bar of the 200mm Coil Winder, then a Spool Cone Kit is available to stop back run once the winding has completed.

These neat cones have needle bearings press fitted into them and fit perfectly on the 10mm top bar.

You get in the kit:

2 x Cones with fitted bearings

2 x Washers

2 x springs

2 x collars. 


Spool Cone Kit

  • Select an option below


Related Products

CNC 200mm Coil Winding Machine (3-Axis)

CNC 200mm Coil Winding Machine (3-Axis)

***13th June 2022 OUT OF STOCK**We should have the next batch of machines made by the middle of Augu..

£3,250.00

CNC Guitar Pickup Mini Coil Winder

CNC Guitar Pickup Mini Coil Winder

Please note: To check the shipping for your country and to see if any taxes apply, first a..

£675.00

Coil Winder Magnetic Tensioner MTCS 0.04mm-0.14mm 10g-120g

Coil Winder Magnetic Tensioner MTCS 0.04mm-0.14mm 10g-120g

Coil Winding Machine Tensioner Kit MTCS For wire sizes of between 0.04mm to 0.14mm  M..

£285.00

Coil Winder Magnetic Tensioner MTCM 0.08mm-0.25mm 50g-400g

Coil Winder Magnetic Tensioner MTCM 0.08mm-0.25mm 50g-400g

Coil Winding Machine Tensioner Kit MTCM For wire sizes of between 0.08mm to 0.25mm  M..

£285.00

Coil Winder Magnetic Tensioner MTCLL 0.14mm-0.40mm 100g-800g

Coil Winder Magnetic Tensioner MTCLL 0.14mm-0.40mm 100g-800g

Coil Winding Machine Tensioner Kit MTCLL For wire sizes of between 0.14mm to 0.4mm  M..

£290.00

Coil Winder Magnetic Tensioner MTCL 0.12mm-0.35mm 80g-600g

Coil Winder Magnetic Tensioner MTCL 0.12mm-0.35mm 80g-600g

Coil Winding Machine Tensioner Kit MTCL For wire sizes of between 0.12mm to 0.35mm  M..

£290.00

Extension Pulley for Feeder

Extension Pulley for Feeder

Extension Pulley for FeederFor use with the 200mm Coil Winder MK4 , this addon replaces the rear cer..

£25.00

Coil Winder Magnetic Tensioner MTCSS 0.03mm-0.07mm 04g-40g

Coil Winder Magnetic Tensioner MTCSS 0.03mm-0.07mm 04g-40g

Coil Winding Machine Tensioner Kit MTCSS For wire sizes of between 0.03mm to 0.07mm  ..

£285.00

CNC Guitar Pickup Quad Coil Winder

CNC Guitar Pickup Quad Coil Winder

**SORRY OUT OF STOCK**Please note: To check the shipping for your country and to see if any tax..

£3,800.00