Please note: To check the shipping for your country and to see if any taxes apply, first add the product to the Basket.
Next goto View Cart and click on Estimate Shipping and Taxes. Enter your Country and apply the shipping. The total will be updated with the shipping and remove taxes where applicable.
Option3 complete Bundle for 110V Mains Power
We will deliver a fully assembled unit aligned and tested but this time complete with 3.1Nm Stepper Motors fully wired into custom made controller box with conduit/end caps, power supply, breakout board + leads and 4.2amp Stepper Drivers.
Also Limit switches and Emergency stop buttons are wired in for you.
Fully tested before it goes out the door.
Up to now we have been supplying the Option3 (Fully Assembled Machine) with everything except the power supply, Spindle and CAD/CAM software. But that has now changed !
CNC Design Ltd are now OEM distributors of the popular Vectric software suites and also now distributors the quality Kress Spindles.
We will be now looking to bundle Option3 with Vectric's Cut2D software.
For full product details please check out their site http://www.vectric.com/products/cut2d.html
Also we will be bundling the Kress Spindle 800 FME
Also as well as having the spindle fitted with a USA plug on the lead we are going to supply two collets and nuts (8mm and 3mm) instead of just the standard 8mm collets that comes with the Kress as standard.
Please note this is for only 110V ac mains
For full product information, please click on the link below which will direct you to our main site
CNC Design Routing Machines detailed product page
|Dimensions (L x W x H)||465mm x 465mm x 410mm (approx.)|
|Work area (L X W X H)||310mm x 310mm x 90mm|
|Accessory||Limit switches and a Emergency stop button are wired in for you.|
|Stepper Motor Torque||3.1Nm|
|Clamping area||370mm x 160mm|
|Rails||12mm Quad Rails on Z-Axis, 12mm Quad Supported Rails on X-Axis, 12mm Dual Supported Rails on Y-Axis.|
|Profile||Frame built of 60x20 anodised aluminium profile.|
|Plates||Mixture of tough 6mm-10mm aluminium plates and a kress spindle holder, custom made.|
|Ballscrews||Ball Screws on each Axis (Not cheap trapezoidal threads).|
|Spindle||Kress Spindle 1050 FME-1|
|Power Supply||Custom made 36V power supply|
|Electronics||Motors fully wired into custom made controller box with conduit/end caps, breakout board + leads and Stepper Drivers.|
|Software/Firmware||Vectric's Cut2D software.|
|Drivers||4.2amp Stepper Drivers|
|Support||Access to a VIP support area, where we can help you setup your machine.|
|Warranty||12 Month return to base warranty.|
CNC Mini Muscle - Option 3 complete Bundle 110V
- Brand: CNC Design Ltd
- Product Code: CNC Mini Muslce Machine MK2
- Availability: 1
Select an option below