January 2018 Back in Stock !
Please note: To check the shipping for your country and to see if any taxes apply, first add the product to the Basket.
Next go to View Cart and click on Estimate Shipping and Taxes. Enter your Country and apply the shipping. The total will be updated with the shipping and remove taxes where applicable.
From January 2018 we will now be supplying the Mini Coil Winder MK4, which has the new ARM Controller MKII fitted.
Please check the product page for more information.
The Mini Coil Winding Machine can be used for semi automatic winding of Guitar Pickup Bobbins by just using the bobbin motor and guiding the wire by hand or you can use the fully automated feeder arm that has a incremental resolution of 0.0125mm and Windows software supplied.
The Machine is made to be robust with a combination of 6mm and 10mm tough aluminium plates that have oxidisation treatment applied make up a solid frame. This stops any unwanted vibration or flex.
USB controlled using software written for Windows.
You are welcome to download the latest software take a look from the link below.Included is the software manual.
Comes with the new ARM Controller MKII board and latest firmware.
Other Document Downloads
|Dimensions of base plate (L x W)||210mm x 210mm|
|Max feeder travel||40mm|
|Maximum Stepper motor RPM||1500 RPM (800 RPM recommended MAX)|
|Maximum bobbin diameter||100mm|
|Feeder max resolution||0.0125mm|
|Power Supply||24V 3amp power supply|
|Software/Firmware||Free Firmware upgrades and Free Windows Software.|
|Support||Access to a VIP support area, where we can tweak the software to suit your needs and help you setup your machine.|
|Warranty||12 Month return to base warranty.|
CNC Guitar Pickup Mini Coil Winder
- Brand: CNC Design Ltd
- Product Code: Mini Coil Winder MK4
- Availability: 6
Select an option below